Our scope is Design, Engineering, Manufacturing, Supply, Painting, Testing, Erection & Commissioning Supervision of Side Stream Filter (SSF) for cooling tower including MSEP Vessel, Filter Media Frontal Piping (MS) & CI Butterfly Valve.
This project is an EPC Contract. Our scope is Design, Engineering, Construction, Procurement, Manufacturing, Supply, Fabrication, Erection, Painting, Testing, Start Up and Commissioning. Aeration Tank, Secondary Settling Tank and Filter Feed Tank in MSEP and 400 meter 40mm uPVC pipe. Plant is fully PLC Based.
Our scope is Design, Engineering and Preparation of Technical Contract Document for Pre & Primary Treatment, Softening, RO & Zero Liquid Discharge Plant. The measure constraint is to remove the Fluoride- 50 mg/lit and Silica- 30 mg/lit from Inlet effluent. (for Gauri Engineering).
Our scope is Commissioning of UASB for Dairy, The plant was commissioned for Inlet COD- 4000 mg/lit & Inlet TDS- 4000 mg/lit.
Our scope is Design and Engineering and Preparation of Detailed Project Report for Proposed Expansion/Augmentation of Dombivli Common Effluent Treatment (DCETP) (for Vasundhara Environmental). The plant was designed for Inlet COD- 3500 mg/lit, Total Nitrogen 250 mg/lit & Inlet TDS- 7000 mg/lit.
This project is an EPC Contract. Our scope is Design, Engineering, Construction, Procurement, Manufacturing, Supply, Fabrication, Erection, Painting, Testing, Start Up and Commissioning. The plant was designed, successfully commissioned and operative for last 3 years for Inlet COD- 20600 mg/lit, Inlet BOD- 6100 mg/lit, Inlet TDS- 15800 mg/lit.
7,000 m3/day, CETP, RIA, COPERATIVE SCOCITY LTD, DHATAV MIDC, ROHA, DIST.- RAIGAD.
Our scope is Modifications (Civil & Electro-Mechanical) including Design, Engineering, Supply, Erection, Commission and Annual Operation & Maintenance of Common Effluent Treatment Plant (CETP).
The plant was modified, successfully commissioned and operated by us for 20 months for Inlet COD- 3000 mg/lit, Inlet BOD- 900 mg/lit & Inlet TDS- 15000 mg/lit.
This project is an EPC Contract. Our scope is Design, Engineering, Procurement, Manufacturing, Supply, Fabrication, Erection & Installation, painting, Testing, Start-up and commissioning.
Our scope is Design, Engineering, Manufacturing, Supply, Supervision, Fabrication, Erection, Painting, Hydraulic Testing, Start Up and Commissioning.
Our scope is Design and Engineering for Resin Chemical Industry (for Vasundhara Environmental).
The plant was designed for Inlet COD- 4000 mg/lit & Inlet TDS- 3000 mg/lit.